nut slot height
Dot action: recommended measurements for nut height and relief?
Dot action: recommended measurements for nut height and relief?
Dot action: recommended measurements for nut height and relief? nut slot height Straight from the factory or off the shelf, an instrument rarely has its nut slots cut to ideal depths Generally they are always cut a little high so that nuts and bolts slot So then the nut becomes the lowest angle But each fret along that line only needs to clear the fret above it So if all the frets are the same
nuts and bolts slot 1 Measure the height of the first two frets by laying a straight edge across them and sliding different combinations of feeler gauge blades under it until they
nut slot depth That's a FLAT radius for a Strat! Think of it as an acoustic neck, then: verify whether the nut slot itself is flat or curved on the bottom In theory, yes The ideal height would be just about the same as a fret's height in the same position as the nut In practice, I've found that there