Perspex Fret Slotting Saw Depth Guide

Perspex Fret Slotting Saw Depth Guide fret slot depth A correct fingerboard thickness should be roughly 14″, meaning your cut depth should roughly be 18″ Cutting at a 18″ depth will ensure that fret slot saw Fret slots are deeper than fret tangs? Not a big deal But if want to fill those areas, get a small piece of rosewood (or something equally

fret slot saw Perspex Fret Slotting Saw depth guide With brass thumbscrews to fit the Tonetech fret slotting saw Depth is adjustable from 1mm to 6mm The guide is made

fret slot depth You never want the slot too shallow, that's for sure Still, most companies cut deep slots to account for leveling, inlays & sanding, different More often than not the problem was the slot being too shallow for the tang on the fretwire I saw the slots to an appropriate depth when making